We may earn a commission when you buy through these links, at no extra cost to you. Prices change often: check the retailer. How we make money
Most home lifters should buy an adjustable flat-incline bench rated well above their body weight plus the heaviest weight they will press, with a seat-to-back gap under 4 cm. Buy an FID (flat, incline, decline) bench only if you want decline pressing or sit-ups with your legs anchored. A flat bench is the cheapest stable option if you only press flat and step up.
In Canada, the REP AB-5200 2.0 is the heavy-duty pick, the Force USA Pro Series FID Bench adds decline for less, and the BowFlex 5.1S is the space saver.
Our picks
- 1Best overall
REP Fitness AB-5200 2.0 Adjustable Bench
Rated to 1,000 lb (454 kg) with 10 back angles, 4 seat angles and a 1.4 in (3.6 cm) pad gap. An optional adjustable post adds three decline angles.
- 2Best for small spaces
BowFlex 5.1S Adjustable Weight Bench
Stands upright on its end in a 60.6 x 71.3 cm footprint, half its in-use footprint, and carries a 600 lb (272 kg) user-plus-load rating.
- 3Best FID bench (Canada)
Force USA Pro Series FID Bench
Adjusts from -10 to 75 degrees through 8 back positions, with a 992 lb (450 kg) weight rating and a limited lifetime frame warranty.
| Model | REP FitnessREP Fitness AB-5200 2.0 Adjustable Bench | BowFlexBowFlex 5.1S Adjustable Weight Bench | Force USAForce USA Pro Series FID Bench |
|---|---|---|---|
| Capacity | 454 kg | 272 kg | 450 kg |
| Back positions | 10 | 6 | 8 |
| Seat positions | 4 | — | — |
| Pad gap | 3.6 cm | — | — |
| Folds away | No | Yes | No |
| Footprint | 146 × 66 cm | 155.6 × 71.3 cm | 132 × 67 cm |
How to choose a weight bench
Flat, adjustable or FID
- Flat bench: one fixed pad. The most stable and cheapest per kilo of capacity. Good for bench press, rows and step-ups, but no incline work.
- Adjustable (flat-incline): the back pad tilts from flat to upright, usually 0 to 85 or 90 degrees. This covers incline press, seated shoulder press and supported rows, which is most of what a home bench gets used for.
- FID (flat, incline, decline): the back also drops below flat, usually by -10 to -20 degrees, and a leg roller holds your feet. Choose it for decline pressing and decline sit-ups. Some FID benches give up a little stability or pad gap for the decline hinge.
Weight capacity
Capacity means your body weight plus the weight you lift, not the weight of the bar alone. A 90 kg lifter pressing 100 kg puts 190 kg on the bench. Leave a wide margin. Makers rate capacity differently: REP and Force USA quote a weight rating, BowFlex quotes maximum user plus load, Mirafit quotes the load the design was tested to, and Rogue does not publish a figure at all.
Pad gap
On an adjustable bench the seat and back are separate pads. The gap between them sits under your lower back when the bench is flat. Under about 4 cm is hard to notice when pressing; 5 cm or more can be felt. Rogue lists 2.5 cm, Mirafit's M450 2.9 cm and REP's AB-5200 2.0 3.6 cm. Mirafit's cheaper M150 lists about 5.5 cm.
Positions and pad height
More back positions let you fine-tune incline press angles, but the useful ones are flat, 15 to 30 degrees, 45 degrees and near upright for shoulder press. A seat that tilts stops you sliding down on steep inclines. Where makers list it, our picks sit 43 to 46 cm high when flat; check the listed flat height if you are short and want your feet flat on the floor.
Folding and storage
A true folding or stowable bench saves floor space but usually costs capacity and rigidity. Several fixed benches, including the REP AB-5200 2.0, the Rogue Adjustable Bench 3.0 and the Mirafit M450 (with an optional stand), can be stood upright on their end instead, which saves most of the floor space without a hinge in the frame.
REP Fitness AB-5200 2.0
REP's heaviest adjustable bench is built on 11-gauge steel and rated to 1,000 lb (454 kg). The back pad has 10 angles from 0 to 85 degrees and the seat has 4 (0, 8, 20 and 30 degrees). Choose the adjustable post option and it also declines to -4, -6 and -8 degrees. The 1.4 in (3.6 cm) pad gap is small for a bench with this many angles. At 115 lb (52 kg) it is heavy to move, though the front handle and rear wheels help, and it can stand upright for storage.
Pros
- 1,000 lb (454 kg) weight rating
- 10 back and 4 seat angles, optional decline
- Standard 12 in or wide 14 in back pad
Cons
- 115 lb (52 kg) to lift and move
- Decline needs the adjustable post option
BowFlex 5.1S Stowable Bench
The 5.1S folds onto its end for storage. In use it measures 155.6 x 71.3 cm; stowed it takes 60.6 x 71.3 cm of floor and stands 132.9 cm tall. The back has six positions: decline (-20 degrees), flat, 30, 45, 60 and 90 degrees, and the seat adjusts too. BowFlex rates it to 600 lb (272 kg) of user plus load. At 27.2 kg it is the lightest bench here, and BowFlex covers the frame for 30 years.
Pros
- Stows upright in half its in-use footprint
- Decline to 90 degrees in one bench
- 30-year frame warranty
Cons
- Lowest capacity of our adjustable picks
- Six back positions only
- Pad gap not published
Force USA Pro Series FID Bench
Force USA's FID bench adjusts from -10 to 75 degrees through 8 backrest positions and has a 992 lb (450 kg) weight rating. It measures 52 x 26.5 in (132 x 67 cm) with a 17 in (43 cm) pad height and an 11 in pad. The frame has a limited lifetime warranty, moving parts 10 years and upholstery 1 year. Force USA's own listing gives two different seat position counts (5 and 6), so we have left that figure out.
Pros
- 992 lb (450 kg) rating
- Decline to -10 degrees
- Lifetime frame warranty
Cons
- Tops out at 75 degrees, short of upright
- Seat position count unclear on the maker's page
What is the best weight bench for a home gym?
For most people, an adjustable flat-incline bench with a stated capacity well above body weight plus lifted weight, 7 or more back angles and a pad gap under 4 cm. The REP AB-5200 2.0 meets all three where it is sold; in the UK the Mirafit M450 does.
Is an FID bench worth it over a flat-incline bench?
Only if you will use decline. Decline pressing and anchored decline sit-ups need a leg roller and a back pad that drops below flat. If you never decline, a flat-incline bench usually gives you a smaller pad gap or a higher rating for the same money.
How much weight capacity does a bench need?
Add your body weight to the heaviest load you will press or row on it, then leave a wide margin. A 90 kg lifter benching 100 kg loads the bench with 190 kg before any bounce or a dropped dumbbell.
What is a pad gap and why does it matter?
It is the space between the seat and back pads on an adjustable bench. When the bench is flat it sits under your lower back. Gaps under about 4 cm are hard to feel; larger gaps can be uncomfortable during flat presses.
Are folding weight benches safe?
They are safe within their stated rating, which is usually lower than a fixed bench. Check the maker's figure and whether it includes your body weight. The BowFlex 5.1S, for example, is rated to 600 lb (272 kg) of user plus load.
How we chose
We have not tested these benches. We compared current models on the specs their makers publish: weight capacity, back and seat positions, pad gap, footprint and warranty. We checked each one is sold new in each market by the maker's own country site or a retailer shipping from inside that country, and used makers' list prices only to place each bench on price. Where a maker does not state a spec, we leave it blank rather than estimate.
Get price drops on this kit by email
Prices change. We'll email you when one we compare drops, only when it's worth sending.